Injection molding master batch manufacturers have a lot of equipment, twin-screw extruder is one of them, the

production of products will sometimes have some defects, the appearance of defects is a master batch products a

very important quality problem, most with the production process, raw materials unsalable, production equipment,

production environment and other factors.  polyethylene wax 

The common defect in the appearance of injection molding masterbatch is strip. In general, the length larger than

2 times of the normal particle is considered as strip, this is mainly because of the starting or broken strip, strip

direction is not straight, granulator wear or there is a gap and other reasons. If you want to solve the problem,

adjust the direction of the Strip into the pelletizer and adjust the length of the water; strictly adjust the process to

handle the broken strip; pay attention to the inspection of the pelletizer and replace the damaged strip in time. 

In order to ensure the good quality of the masterbatch, avoid the effect of strip on masterbatch application, and

make the masterbatch more favored by the users, the injection molding masterbatch manufacturers should adopt

proper vibrating screen and sieving treatment.

Qingdao Sainuo Chemical Co.,Ltd. We are manufacturer for PE wax, PP wax, OPE wax, EVA wax, PEMA, EBS,

Zinc/ Calcium Stearate…. Our products have passed the REACH, ROHS, PAHS, FDA testing.

Sainuo rest assured wax, welcome your inquiry!

Website：https://www.sanowax.com

E-mail：sales@qdsainuo.com

               sales1@qdsainuo.com

Adress：Room 2702,Block B, Suning Building, Jingkou Road, Licang District, Qingdao,China