Oleic acid amide is mainly processed from vegetable oil and has the appearance of small waxy particles (small crystals) without peculiar smell. This product has good solubility with resin, is stable to heat, oxygen and ultraviolet rays. it has typical polarity and nonpolar molecular structure, and can form single molecule film at the material interface, it has the functions of anti-adhesion, smoothness, increasing smoothness, leveling, waterproof, anti-wetting, anti-precipitation, anti-fouling, anti-static, dispersion and other functions. It is anon-ionic Surfactant that is non-toxic, non-corrosive and has excellent performance. There are many chemical routes for the preparation of oleic acid amide, among which the main one is the synthesis of fatty acid amide by the reaction of fatty acid and ammonia, which plays a wide role in modern chemical industry. 

Qingdao Sainuo oleamide can reduce friction, reduce viscosity, good lubricity, improvefluidity, smell small, anti-yellowing and anti-caking ability better. It widely used in color masterbatch, cable, Low-density polyethylene film,etc..

Index

1. Lubricant and anti-adhesion agent

It can be used for polystyrene, polypropylene and Polyamide lubrication and film anti -adhesion, to improve injection molding and blow molding processing performance, but also has anti-static effect, reduce dust in the product surface adsorption. It can also be used in polyvinyl chloride plastics and has an internal lubrication effect, usually in the range of 0.2% to 0.5% . The chemical fiber industry can be used as softener and waterproof agent. Used as a dispersant for dyes and pigments in the dyestuff industry. In the ink industry can be used as anti-adhesive and anti-precipitation agent. It can be used as antirust agent for metal in machinery industry. In addition, can also be used as typing copier paper, fiber oil and so on. Is an important long-chain fatty amide, widely used as polyethylene, polypropylene film lubricant and anti-adhesive; Anti-binder and anti-precipitation agent of certain macromolecule base materials; lubricant and defilming agent of resin; softener and water-proof agent of fiber; dispersant of dyestuff and pigment, rust-proof agent of metal, etc. . In addition, it is an important intermediate in the manufacture of various textile auxiliaries and Surfactant. The use of it in polyethylene film reduces friction between the film and the conveyor during processing, thus increasing production and simplifying the operation of the final product. It can also be used as a mold release agent for polyolefin injection molding to facilitate mold release, thus increasing production and improving the surface gloss of products. Due to the low addition amount (0.1-0.15%) in the film, it must be added in the form of mixture or masterbatch in the processing plant to ensure a uniform smooth effect.

2. Low-density polyethylene Chemical additive for film material

The addition of 0.1-0.5 oleic acid amide to the Low-density polyethylene film material can not only improve the antistatic and lubricating properties, but also improve the anti-wetting properties. It can obviously reduce the friction coefficient and the adhesion resistance, and remarkably improve the benefit of blowing film (extrusion) , the utility model can effectively prevent the adhesion between films and the agglomeration between grains, increase the surface smoothness of films, prevent the deposition of dust on the surface of products, and produce very smooth plastic products.

3. Modifier for plastic ink

Adding 2-5 oleic acid amide to polyamide plastic ink can improve the printing performance and ink’s lubricity, enhance the waterproof, anti-scratch, anti-fouling (because the ink is not dry and caused by dirt) , wear resistance. In addition, it can also improve the ink on the printing surface of the auxiliary exhibition and adhesion, so that its imprinting clear, bright color.

4. Antistatic and anti-caking agent

Polypropylene (PP) , polystyrene (GPPS) , phenolic (PF) resin, amino resin, polyethylene terephthalate, polycaprolactam film, cellulose acetate and nitrocellulose lubricants, anti-static agent, anti-caking additives. During the processing of plastics, there is friction between solid polymer particles, molten polymer molecules and between the melt and the metal surface of the processing equipment, which will decrease the fluidity, decrease the discharging speed and increase the energy consumption; At the same time because of friction produces a lot of heat, reduce the stability of polymer, plastic products to the quality of bad impact, easy to cause surface roughness lose luster. At present, plastic processing is moving towards automation and high-speed direction, this friction force is increasing day by day, so it is very urgent to develop and use the new high-efficiency lubricant, the lubricant function is more prominent, the effect is more remarkable. For the old lubricants such as stearic acid and its salts, PE wax, PP wax and OPE wax, they can not completely meet the needs of modern plastics processing industry for plastic modification and cost reduction, it promotes the extensive application of filling materials such as calcium carbonate, talcum powder and calcined pottery. However, the increase of these filling materials brings new problems to plastic processing and product quality. In this case, the proper lubricant can increase the compatibility between the filler and the resin, and make the filler evenly dispersed in the whole product without causing bad phenomena such as seam (fisheye) and rough inner and outer surface, to increase the filler, reduce resin, improve the quality of products.

Qingdao Sainuo Chemical Co.,Ltd. We are manufacturer for PE wax, PP wax, OPE wax, EVA wax, PEMA, EBS,Zinc/Calcium Stearate…. Our products have passed the REACH, ROHS, PAHS, FDA testing.

Sainuo rest assured wax, welcome your inquiry!

Website：https://www.sanowax.com

E-mail：sales@qdsainuo.com

               sales1@qdsainuo.com

Adress：Room 2702,Block B, Suning Building, Jingkou Road, Licang District, Qingdao, China