Industry News
-
![[pe wax] Introduction of filler masterbatch](//cdnus.globalso.com/sanowax/填充母粒7.jpg)
[pe wax] Introduction of filler masterbatch
In the process of plastic processing and molding, the pellets made by mixing various additives(such as pe wax) and fillers with a small amount of carrier resin are composed of three parts: carrier resin, fillers and various additives. The filling masterbatch can be used to process plastic film,...Read more -
Advantages and Disadvantages of PVC pipes
PVC pipe is a kind of synthetic material that is well-loved, popular and widely used in the world today. Its global usage ranks second among various synthetic materials, but it also has advantages and disadvantages. Today, Qingdao Sainuo Polyethylene Wax manufacturer will take you to find out....Read more -
Selection of common dispersants for color masterbatch
As we all know, the dispersant used in the color masterbatch must be well dispersed, so that the manufactured color masterbatch will be of high quality, so it is particularly important to choose the appropriate dispersant. Today, Qingdao Sainuo lubricant and dispersant manufacturer discuss with...Read more -
![[pe wax] Usage skills of additives in powder coatings (2)](//cdnus.globalso.com/sanowax/EBS-Powder6.jpg)
[pe wax] Usage skills of additives in powder coatings (2)
The adaptability of powder coating additives to the production process. Some powder coating additives should be considered in the formulation design due to the harsh production process conditions, which may be high temperature, high speed shear, etc., which causes the decomposition of powder co...Read more -
![[pe wax] Usage skills of additives in powder coatings (1)](//cdnus.globalso.com/sanowax/SB-img-powders.jpg)
[pe wax] Usage skills of additives in powder coatings (1)
The compatibility of powder coating additives and resins is the first thing to be aware of when choosing additives. pe wax Powder coating additives must remain stable in the powder coating for a long period of time in order to achieve their due effectiveness. Therefore, the commonly used addi...Read more -
Analysis and solution of common problems in edge banding hot melt adhesive (2)
In the last article, we learned about the first half of the analysis and solutions of common problems of edge-sealing hot-melt adhesives. This article Qingdao Sainuo polyethylene wax manufacturer will take you to understand the remaining contents. 1. The edge banding is easy to fall off during t...Read more -
Analysis and solution of common problems in edge banding hot melt adhesive (1)
In the process of using hot-melt adhesives, due to changes in various situations, various problems will be encountered. To solve these problems, you must have a comprehensive understanding and comprehensive analysis of various factors. Such as temperature, humidity, thickness, speed, surface, p...Read more -
![[pe wax] Common testing methods for powder coatings](//cdnus.globalso.com/sanowax/powder-coating-colours-and-finishes1.jpg)
[pe wax] Common testing methods for powder coatings
1. Appearance recognition method The texture is smooth, fluffy and extremely light, the quality is good; otherwise, the quality is poor. The larger the volume, the better the quality; otherwise, the quality is poor. The longer the storage time, the better the quality; on the contrary, it ...Read more -
![[Polyethylene Wax] Some limitations of color masterbatch](//cdnus.globalso.com/sanowax/微信图片_20190917154756.jpg)
[Polyethylene Wax] Some limitations of color masterbatch
Color masterbatch plays an important color function in the injection molding industry. But there are limitations when using color masterbatch. After all, everything in the world cannot be perfect. Today, Qingdao Sainuo polyethylene wax manufacturer will show you the limitations of color masterb...Read more -
The development of polyvinyl chloride (PVC)
Polyvinyl chloride is widely used. It has been in development for more than 100 years today. Qingdao Sainuo pe wax manufacturer hascollected various dates and summarized the following content. Let us take a look at the development process of polyvinyl chloride. 1913 – German inventor Fri...Read more -
Analysis of the Causes of Air Bubbles in Road Marking Paint
The general road marking paint applied on the asphalt pavement will not cause air bubbles, but some road marking paint will appear air bubbles on the cement pavement. Today Qingdao Sainuo polyethylene wax manufacturer will show you the road marking paint causes of bubbles. 1. Some manufacturers ...Read more -
Pigment dispersion process
The pigment dispersion process consists of three steps: wetting, dispersing, and stabilizing. During the wetting process, the air and water vapor on the surface of the pigment are replaced by the resin solution, and the dispersing agent, especially the low molecular wetting and dispersing agent...Read more -
Application characteristics of polyethylene wax in road marking paint
Polyethylene wax has a high softening point, which can improve the heat resistance of road marking paint; Low viscosity, adjustable to improve leveling; Good flow performance, conducive to construction and improve construction efficiency; High hardness, wax is distributed in the coating film to...Read more -
Causes of white spots on blown film
The reason for the white spots on the blown film is due to the fact that during the extrusion ofthe blown film, the calcium carbonate agglomerates failed to open and the dispersion was uneven. In order to disperse the calcium carbonate particles in the masterbatch uniformly into the matrix pl...Read more -
Principle of adding lubricant in PVC profile（3）
The balance of the lubrication system is not a simple balance between lubricants, but the lubrication balance of the entire formulation system. The formulations of different stable systems have different requirements on lubricants, and the lubricants played by the lubricants in the formulations...Read more
![[pe wax] Introduction of filler masterbatch](http://cdnus.globalso.com/sanowax/填充母粒7.jpg)
![[pe wax] Usage skills of additives in powder coatings (2)](http://cdnus.globalso.com/sanowax/EBS-Powder6.jpg)
![[pe wax] Usage skills of additives in powder coatings (1)](http://cdnus.globalso.com/sanowax/SB-img-powders.jpg)
![[pe wax] Common testing methods for powder coatings](http://cdnus.globalso.com/sanowax/powder-coating-colours-and-finishes1.jpg)
![[Polyethylene Wax] Some limitations of color masterbatch](http://cdnus.globalso.com/sanowax/微信图片_20190917154756.jpg)
