Masterbatch is composed of carrier resin, filler and various additives. The limit of additives or filler content in masterbatch is several times to more than ten times higher than that in actual plastic products. Masterbatch is the most representative masterbatch in plastic masterbatch. Polyethyl...
An ink is a homogeneous mixture of pigments (such as solid components such as organic pigments and dyes) , binders (vegetable oils, resins or water, solvents, the liquid components of the ink) , fillers, additives (plasticizers, desiccants, Surfactant, dispersants) , etc.
Sainuo pe wax is super ...
Polyamide (PA) is a polymer containing repeated amide groups on the main chain. Often called Nylon, PA is one of the earliest developed and most widely used engineering plastics. In this article today, Qingdao Sainuo will take you to know the ten key points of nylon modification.
pp wax for Nylo...
At present, there are three kinds of anti adhesion agents commonly used for mouth opening smoothing agent, oleic acid amide, erucic acid amide and silicon dioxide. There are also some differences in specific categories and usage methods. This paper mainly compares the differences between the thre...
Many additives, lubricants, stabilizers, foaming agents and other additives are used in PVC foaming products, and these additives also restrict each other. Today, in this article, Qingdao Sainuo will take you to understand the characteristics of mutual checks and balances of various additives use...
Homopolyethylene wax is mainly used in polyolefin Color Masterbatch, including polyethylene Color Masterbatch, polypropylene color masterbatch and EVA color masterbatch. Due to the large amount of pigment or filler in the color masterbatch, and the particle size of these pigments and fillers is v...
Polyethylene wax is low molecular weight (<1000) polyethylene, which is a commonly used additive in plastic processing industry. Using pe wax in plastic extrusion molding can improve the fluidity of materials, increase production, and allow higher filler concentration.
Polyethylene wax is wi...
In the application of polypropylene fiber spinning, the applicability of polyethylene wax is limited. For ordinary fine denier silk and high-quality fibers, especially for soft wool like fine denier and BCF filaments suitable for paving and textile clothing, polypropylene wax is often preferable ...
Polyethylene wax is a low molecular weight polyethylene wax, with a general molecular weight of about 2000~5000. Its main components are straight chain alkanes (content 80~95%), and a small amount of alkanes with individual branches and monocyclic cycloalkanes with long side chains. It is widely ...
Polyethylene wax is a medium polymer of ethylene. It is not in the gaseous state of ethylene, nor is it different from the hard block of polyethylene. It is in the waxy state. It has a wide range of uses and has quite successful application cases in many industries.Today, Sainuo will take you to ...
In today’s article, Sainuo takes you to know about the application of polyethylene wax and oxidized polyethylene wax in road marking paint.
Wonderful combination of oxidized polyethylene wax and road marking paint
As an auxiliary material of road marking paint, oxidized polyethylene wax is...
Wax is used earlier as a coating and ink additive, which is characterized by simple use. After coating construction, due to solvent volatilization, wax in the coating precipitates, forming fine crystals, floating on the surface of the coating film, which plays a variety of roles in improving the ...
1. Characteristics of improper addition of external lubricant in PVC foam products
Paraffin wax and PE wax are the most commonly used external slip agents in foaming products. Paraffin wax is easy to precipitate, so PE wax is generally used.
The external lubrication is insufficient, the tempera...
Erucic acid amide, as an important derivative of erucic acid, is an excellent fine chemical product with a wide range of applications. Because of its high melting point and good thermal stability (stable at 273 ℃), it is mainly used as anti adhesion agent and smoothing agent of various plastics a...
Polyethylene wax is a kind of polyolefin synthetic wax, which generally refers to homopolyethylene with relative molecular weight less than 10000. In a broad sense, ethylene polymers with poor strength and toughness and can not be processed as a single material can be called polyethylene wax. Pe ...